UB expert breaks down the science behind possible flooding

Release Date: November 23, 2014 This content is archived.

Print
Joseph Atkinson.
“You get about about an inch of water entering the system for every 10 inches of snow that melts. ”
Joseph Atkinson, professor of civil, structural and environmental engineering
University at Buffalo

BUFFALO, N.Y. — University at Buffalo engineering expert Joseph Atkinson can discuss how flooding could affect Western New York communities as warmer weather settles over areas that received massive amounts of snowfall this week.

Joseph Atkinson, PhD
Professor of Civil, Structural and Environmental Engineering
University at Buffalo
Atkinson may be reached at 716-645-2220, atkinson@buffalo.edu, or over the weekend through Charlotte Hsu in UB Media Relations at 510-388-1831.

Atkinson, an expert in fluid mechanics and hydrology, says the risk of substantial flooding is real.

"There is simply a lot of water piled up that has to go somewhere when it melts," he says. "The main factors that will affect flooding are rate of snow melt (and any additional rain water), soil saturation levels and the capacity of streams draining the region.

"I don't know how much flooding there could be, but I suppose one could make an estimate by looking at previous large storms," he adds. "You get about about an inch of water entering the system for every 10 inches of snow that melts. So if all the snow in the hardest hit areas melts in two or three days, we are looking at something on the order of 2 to 3 inches per day of water entering the system for three days."

Not all of that water will remain above ground and cause flooding, but the heavy volume poses a substantial risk for affected communities, he says.

Media Contact Information

Charlotte Hsu is a former staff writer in University Communications. To contact UB's media relations staff, email ub-news@buffalo.edu or visit our list of current university media contacts.